Audi Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
75 Posts
Discussion Starter #1
I tested an A6 and A3 unit in my car and although they show general location the car position does NOT move with the road. I don't know what the hell is going on. I have never had this issue. I have test other maps as well but still nothing... Can someone please shed some light on this issue!?


Edit* I figure this is cause of GALA and Can-bus not optimized for A4... Silly me.
 

·
Registered
Joined
·
6,767 Posts
Did you code the units for an A4? The A3 CAN seems to have a different protocol for the speed impulse and when coded for an A6 the RNS-E expects the speed signal over the v-wire. Coding the unit for an A4 (assuing you are trying this in you A4) should fix the issue.
 

·
Registered
Joined
·
75 Posts
Discussion Starter #3
AudiA4B6US said:
Did you code the units for an A4? The A3 CAN seems to have a different protocol for the speed impulse and when coded for an A6 the RNS-E expects the speed signal over the v-wire. Coding the unit for an A4 (assuing you are trying this in you A4) should fix the issue.
How exactly do you code for an A4? Through VAG?
 
1 - 4 of 4 Posts
Top