Audi Forum banner
1 - 1 of 1 Posts

6 Posts
Discussion Starter · #1 ·
I have remove the CLK wire from Pin12 of T32c and I reinstall into Pin 5 (CAN H ) of T32c.
and i remove the DATA wire from pin 13 of T32 C and reinstall into pin 6 (CAN L ) of T32 nothing happend .
i have rns-e adapter with 2 separate cable in D power Conecter Number 9 and 10 i have testit to put T32 in the pin 5 (CAN H) and in the pin 6( CAN L) is turning ON and i pres the cod ok and ighets work after 2 seconds is
turning /OF all RNS-e. :cry:
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.