Audi Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1
First and foremost, this usergroup is awesome and apparently filled with people who did not nap in engineering class. Thanks for all of your help.

I was able ot get all of my connections up and going with the helpful guides and instructions.

I installed an IceLink Plus, Dietz 1417 with an ME3 and the Dietz 1280 with a switch (I put my switch in the glovebox).

I used the constant on (+12 V) and the ground from the RNS-E wiring harness for all of these components including the switching connection of the ME3.

:?: QUESTION #1 I have heard of several options for the ME3 ACC connection including a manual power switch or using a fuse connection that is switched based on the ignition position. Is there no pin out on the back of the ME3 that is used as a remote that could be configured with a relay to meet this need? (How does the Bose amp turn on and off or is it on all of the time also?)

:?: QUESTION #2 I am getting horrible reception from the ME3 supplied TV anntenna. Can it be upgraded, if so with what? Is there a better position than under the dash attached to what looks like the back of the airbag mount?

Thanks Again :D
 

·
Registered
Joined
·
515 Posts
QUESTION #1 I have heard of several options for the ME3 ACC connection including a manual power switch or using a fuse connection that is switched based on the ignition position. Is there no pin out on the back of the ME3 that is used as a remote that could be configured with a relay to meet this need? (How does the Bose amp turn on and off or is it on all of the time also?)
some have suggested to use pin 13 (U14), but i have read that you must use a relay with it..

QUESTION #2 I am getting horrible reception from the ME3 supplied TV anntenna. Can it be upgraded, if so with what? Is there a better position than under the dash attached to what looks like the back of the airbag mount?
Teddy (who always does his homework) was going to give this one a try, but hasnt had a chance to install it yet..

http://www.vwnavi.com/vwnavi/photos/albums/userpics/Slide49.JPG

http://qualitymobilevideo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=Q&Product_Code=TVAGAK
 
1 - 2 of 2 Posts
Top